Mounting kit for Loxone Intercom White Part 100484 with CodeTouch Light Anodized EV1, consisting of front panel, device holder, compensation film and screw set. For Doorbird UP UP box D202.
Mounting kit on D202 Doorbird UP box for Loxone Intercom with CodeTouch.
With this kit you can install the new Loxone Intercom and the Codetouch in an existing Doorbird D202 flush-mounted box.
In order for this to find its place in the small box, 4 metal surfaces in the flush-mounted box must first be flexed on site. Our first customer in the pilot project managed this himself without any effort.
In our kit, the intercom and the code touch sit directly next to each other without the usual distance. The Loxone components can therefore not be disengaged with a suction cup as usual. To remove modules again, the front panel is unscrewed from the flush-mounted box, then the housing shell is unscrewed from the front, then the modules can be pushed out.
Additional Information
| weight | 300g |
|---|---|
| size | 200×118×20mm |
| Dimensions housing shell | 170 x 101, installation depth 16 mm |
| attachment | 4 security countersunk screws with pin M4 x 16mm with Torx drive TH25 |
| scope of delivery | 8 countersunk screws for fastening the Loxone frames in the housing shell |
This product is a custom-made product and non-returnable!
You might also be interested in:
