Mounting kit 1E-VH f. Loxone Intercom NEW. Mounting from behind in sheet steel products. Consisting of front panel, housing shell, set of screws.
 
 With this variant, the intercom with code touch can be used flush in V2A stainless steel assemblies such as mailboxes, house doors or steel.
 For this purpose, a rectangular cut-out is to be made in the steel construction, for attachment 4 welding studs are to be placed on the back of the steel plate.

 The component must be accessible from behind/inside, for example via an inspection flap, in order to be able to carry out assembly and connection.
 
 The required  Individual frame for the new intercom is not included in our scope of delivery.
 On the back, a housing shell is plugged onto the front, into which the mounting frames available from Loxone are mounted directly.

 The housing shell hermetically seals the unit and directs the speaker's sound forward through the left slot of the front panel.
 The right slot is used for a symmetrical look.
 There is a predetermined breaking point in the middle of each module position, you can break it open as required and run the supply line through it. Here, too, you can additionally seal with acrylic after the cable has been routed.
 
 
 Additional Information
 Weight
 300g
 size
 130×120×13mm
 Dimensions                        
 100 x 112 mm, installation depth 13 mm
 attachment
 With 4 welding studs that must be attached to the back of the V2A
 scope of delivery
 4 countersunk screws for attaching the Loxone frame in the housing shell 4 pan head screws for attaching the housing shell to the front panel 1 round cord seal
 Custom-made and non-returnable!