Mounting kit type 3E for Loxone Intercom, NFC CodeTouch and preparation for eKey sLine fingerprint reader.
For mounting on 3-way flush-mounted box, article 33-1573C.
With the mounting kit from PebaQ you get a high-quality and weatherproof aluminum front plate, which is mounted directly onto the flush-mounted box in size 3-way.
The 2 individual frames required for this product for the new intercom and a Codetouch are available from Loxone Sales; they are not included in our scope of delivery.
A housing shell is attached to the back of the front, into which the mounting frames available from Loxone are directly mounted.
For mounting on 3-way flush-mounted box, article 33-1573C, please order separately.
The housing shell hermetically seals the unit and directs the speaker sound forward through the left slot in the front panel. The right slot provides a symmetrical appearance. Each module position has a predetermined break point in the center; you can break this as needed and route the power cable through. Here, too, you can further seal it with acrylic after the cable has been routed.
The front panel has a 10mm foam rubber seal on the back to prevent water from penetrating the box. Please note that the front panel must be flush with the flush-mounted box. If there is overhanging plaster, for example, you will need to additionally seal the front panel against the wall with acrylic.
We offer an optional engraving of your family name above the intercom. The engraving is done after anodizing. With light anodizing, the lettering is discreetly visible; with black anodizing, the lettering is light, just like the color of the raw material. Please order the engraving separately; item number 33-0101G is available for all variants.
Tip: You can also add engraving yourself using a colored pencil in the desired color.
The Generation 1 Codetouch differs in installation height. To compensate for this height difference, we can supply a 0.3 mm PVC film upon request, which is mounted under the PVC wall mount of the old Codetouch. This film must not be used when using the new Codetouch.
| Weight | 1000 g |
|---|---|
| Size | 370 × 150 × 8 mm |
| Version for accessories | M3: Contains 3 module fields for single frames, SL: Preparation for eKey sLine Fingerprint #204752, T0: Area closed - customer drills himself, FE: Preparation for ekey Type 101 150, T2: 2 LED call buttons installed, T4: 4 LED call buttons installed |
| Dimensions of the housing shell | 100 x 210 mm, installation depth 13 mm |
| Fastening | 4 security countersunk screws with pin M5 x 16mm with Torx drive TH25 in a grid of 126 x 236 mm. |
| Scope of delivery | 8 countersunk screws for fastening the Loxone frames in the housing shell |
Scope of delivery:
1x mounting kit including screws
* Not included: Intercom, NFC Code Touch, Fingerprint not included
You might also be interested in:
Deep flush-mounted box for mounting kits
eKey sLine Fingerprint
